Ce 1 4′′ to 2′′ Finn Power Hydraulic Hose Crimping Machine

Ce 1 4′′ to 2′′ Finn Power Hydraulic Hose Crimping Machine

Product description:

Model DX68 CNC hose crimping equipment has equipped with computer numerical management program, quickly crimp and excellent high quality. This machine functions large crimp accuracy, huge power, reduced sound and effortless to run. It tends to make the mould base division to be far more even via the double inclined aircraft 8-flap mould seat geared up with a large accuracy guiding system. DX68 CNC hose crimping machine is largely utilised for crimping processing for high force hydraulic hose assembly in the mechanical engineering. It can also be used for crimping steel pipes, especially big pipes and irregular condition pipes.This device features little and moveable visual appeal, large pressure, low noise and effortless to run. The buckling amount can be exact adjusted by way of a scale. It helps make the mould foundation division to be much more even by way of the double inclined airplane 8-flap mould seat outfitted with a high accuracy guiding system.

Set up and Operation
one. Incorporate adequately 70 liters of CZPT Wall brand 46# anti-abrasion hydraulic oil. If the space temperature is reduce than 10ºC, ten% transformer oil is need to include.
Link the electric supply effectively as for each the equipment demands, to make the path of the motor rotation to be constant with the rotation course marking, and grounding protection shall be accomplished.
two. Regulating the scale
The scale is utilised for regulating the quantity of the buckling. When it is controlled clockwise, the buckling sum will reduce, when it is controlled anticlockwise, the buckling sum will improve. The scale is linked jointly with oil cylinder end cover by means of three socket head screws and 3 springs on the scale base. When utilizing a hand to pull the scale (vertical to the oil cylinder end protect direction), the scale can flexibly go away from the oil cylinder finish protect. When releasing the scale, the scale will be recovered relying on spring drive. Before the equipment is turned on, inspect carefully if the scale telescoping is adaptable and if the guide link is dependable.
3. The principal scale is turned inside of line of the secondary scale, flip the device on for test operate, and observe if all steps are standard. If when the piston conducts reciprocating motion, there is a crawling phenomenon, the bleed screw on the oil cylinder leading shall be unscrewed for exhausting air.
4. Strain regulation
The buckling strain and opening mould pressure will be controlled by means of two knobs at the back of the oil cylinder (see figure), when it is regulated clockwise, the force will improve, when it is regulated anticlockwise, the strain will lower (The pressure has currently been nicely regulated when ex-factory).
five. Operation 
Based mostly on the measurement of the rubber hose to be buckled, choose suitable mould as per the specialized parameter reference table of the locking pipe and mount it on the mould foundation. Regulated nicely the scale position as for every the knowledge in the knowledge in the table, the pipe locking can be accomplished. After pipe locking, use a vernier caliper to mease the outside the house diameter dimension of the pipe sleeve following buckling to see if it satisfies the reference desk info of the parameter. If it does not meet the info, the scale shall be exactly controlled right up until it fulfills the demands. Because the manufactures of the pipe sleeve are different, so, particular dimension, material, hardness and many others are undoubtedly not the identical. These elements would end result different influences on the pipe locking result, as a result, the info in the table is only for reference, the comprehensive data just take the strain examination as the foundation.

 Notices

  1. When buckling, make the joint to find the mould center as significantly as feasible, the joint is not buckled on the hex nut.
  2. Avoid instrument and other foreign make a difference from moving into the locking head.
  3. Soon after the operate is completed for each time, the eight-block mould foundation have to be produced to lengthen to the best extent, this can make the spring to be at extension standing. If not, the spring will be harm.
  4. When doing work, the hand must not stretch into the locking head.
  5. The energy supply must be switched off when maintenance is done.

Servicing

  1. We will offer a promise to maintain the equipment in very good repair inside of 3 many years from the working day when the equipment is obtained. All fitting troubles will be cost-free of demand fixed (or changed if required) during the ensure interval. The injury resulted from inappropriate use o accident damage does not belong to cost-free of cost restore range.
  2. The hydraulic oil in the oil tank should be frequently checked, if oil quantity is located to be inadequate, the oil shall be well timed supplemented. If the oil liquid is polluted, it shall be filtered or changed.
    The locking head shall keep inside cleanliness. Steer clear of the international issues for the duration of processing to enter into the locking head oil cylinder through the mould to impact the regular use. Wipe out the overseas matters, which are brought by the mould human body in time when buckling the joint.
    Regularly fill suitable grease into the mould physique for lubrication.

Promise
We will offer a promise to keep the machine in good repair inside 3 several years from the working day when the machine is acquired. All fitting troubles will be free of demand fixed (or replaced if required) during the promise interval. The harm resulted from poor use o incident hurt does not belong to free of demand fix assortment.

Troubleshooting

Difficulty phenomena Difficulty purpose Getting rid of technique
Device has not motion Oil tank has not been loaded with oil Fill oil as for each need
Motor rotation direction is not proper Regulate two stage traces
CZPT trouble Overhaul electric circuits
Scale is ruined The scale is fixed on the oil cylinder conclude encounter by the screw Control the scale as for each the instruction to make scale to telescope freely
Conductor at scale spot is connected with scale Anew hook up the scale conductor to make it to be insulated from scale base
CZPT difficulty Overhaul electrical circuits and electric factors
Scale conductor slicing Anew hook up scale
System strain is excessively reduced Modify buckling strain-regulating valve
No buckling The valve main of solenoid reversal valve is seizured by overseas matters Dismount solenoid reversal valve, use gasoline to thoroughly clean the valve core.
CZPT trouble Overhaul electrical circuits
Mould is not opened Opening mould stress is excessively minimal Modify opening mould force regulating valve
CZPT trouble Overhaul electrical circuits
Big sound Installation is not stable Carry out horizontal stable installation
CZPT oil is excessively dirty CZPT or modify it
CZPT is blocked Use gasoline to cleanse the filter
Mould base crawls Fuel in the hydraulic oil has not bee exhausted totally Appropriate unscrew the bleed screw, make the piston in the oil cylinder to move again to very last position to exhaust gas, then screw down bleed screw.
Lubrication is very poor Smear grease on the operating inclined experience of mould base
Oil leakage Joint is not tightened intently Tighten the oil pipe joint
Sealing washer is destroyed. Change sealing washer.

Our support:

Pre-Sales Services

* Inquiry and consulting support.
* Sample tests assistance.
* View our Manufacturing unit & Business office.
 

After-Product sales Support

* Warranty for three several years.
* Coaching how to instal and use the equipment.
* Supply free rapid-dress in part.
 
Payment Phrase:

CZPT Assurance

* Spend to our firm’s USD lender transfer BY T/T.
* 100% merchandise high quality protection 100% on-time cargo protection 100% payment protection.

T/T

* 100% T/T in progress(normal types in inventory).
* fifty% T/T in progress, stability compensated prior to shipping(for the CZPT models).

Our factory also have take the payment by western union,paypal and income gram.

FAQ:
one.Issue:Are you maker or trading firm?
Solution:We are maker since 1997.

two.Query:Certificates ?
Answer:CE,ISO

three.Issue:Supply time?
Reply:The equipment arein stock now,can be shipped as you need.

four.Issue:What is theMOQ?
Response:1 set for you take a look at.

5.Query:Can I get some price reduction ?
Yes, friend.The a lot more you get, the a lot more you preserve.

6.Query:What is the payment?
Response:T/T in advance,as most of our crimping device design are in inventory.
L/C,western union,paypal and money gram also can be recognized.

seven.Query:Can you make CZPT designs or Brand?
Of training course, we are specialist OEM manufacturer.

8.Issue:Can I visit your manufacturing unit?
Yes,you are warmly welcome to visit our manufacturing unit at any time. Just before the going to, remember to contact us to start with and verify the checking out time, our car can select up you to our factory.
 

Why pick CZPT Factory?

one.Substantial Quality CE UL ISO approved DX68 hose crimping equipment.

two.CZPT Affordable guide hose crimping machine,Greatest Quality you at any time have.

three.Samway create the hose crimping device up to 800mm diameter hose with 2500 ton urgent force.

four.Fast shipping and delivery, our factory can dispatch the equipment in 24 hours when obtain the payment and assure to ship nomally 7 operating days on board.

Discounts available with bulk acquire

Braided hose crimper DX68 Up to 2” 6SP R15 CZPT Hose Compact in Dimension Cost-effective CZPT Device

220V 240V one phase  50/60hz, 380V/400v/415v/440v 3 phase equipment have stock.

A excellent inexpensive braided hose crimper will crimp up to 2″ 4SP/4SH hydraulic hose,the device is equiped with latest technological innovation,Motor from SIEMENS company control method from SIEMENS,CZPT hydraulic valves,NOK seal make the equipment druable.

Finn electrical power collection braided hose crimper are mostly for support and tiny generation purpose,economical and compact in design,best for most of your demands in hose assembly.

Primary customers:RYCO,PIRTEK,PARKER United states of america,CATERPILAR etc.

OEM support:Our factory hydraulic hose crimping machine for sale up to thirty”,crimping variety up to 1000mm obtainable,5000 ton crimping force.

Warranty:Our manufacturing facility hose crimping equipment give three a long time guarantee from day of purchasing.

Ce 1 4′′ to 2′′ Finn Power Hydraulic Hose Crimping Machine