CZPT Horizontal Mining Minerals Processing Ultra Chrome Alloy Slurry Pump
Introduction:
1. HS series slurry pump is made for the continuous pumping of large abrasive, higher density slurries with small maintenance needs. The donning parts are created of ultra chrome or and rubber. It will sustain large effectiveness over the use life of its components.
two. The metallic damp areas and rubber types can be interchangeable for managing distinct liquids or slurries.
three. HS slurry pumps are available in dimensions ranging from 1 inch to eighteen inch discharge and function large effectiveness efficiency capable of flow charges from 10.8 to 5400 m³/h and heads up to 125 meters for higher head designs.
Characteristics:
1. Cylindrical framework of bearing assembly: handy to adjust the room in between impeller and front liner
and can beremoved fully
two. Interchangeable anti-abrasive damp areas produced of high-chrome alloys
three. Casing halves of ductile iron with exterior reinforcing ribs supply higher running pressure capabilities
and an additional measure of security.
4. The discharge branch can be oriented to any 8 positions at the interval of 45 degrees
5. A variety of drive varieties: DC(immediate connection), V-belt travel, equipment box reducer, hydraulic couplings, VFD,
SCR control, and so on
6. The shaft seal uses the packing seal, expeller seal and mechanical seal
Standard Application:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Waste sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • CZPT |
| • Alumina Business | • Electricity Plant | • Potash Fertilizer Plant | • Other industries |
| • Iron ore sand | • Copper Concentration | • Gold mine | •Molybdenum |
| Model | Max Energy (Kw) |
Inlet & Outlet dimension (inch) | Material for Wear Parts | Circulation Fee (Q) | Head (H) meter |
Velocity (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | 15 | 1.five/one | M | 12.six~28.eight | three.5~eight | six~sixty eight | 1200~3800 | 152 |
| R | ten.eight~twenty five.two | three~seven | seven~fifty two | 1400~3400 | 152 | |||
| 40HS-B | fifteen | two/one.five | M | 32.four~72 | nine~20 | six~58 | 1200~3200 | 184 |
| R | 25.two~54 | 7~fifteen | 5.five~forty one | one thousand~2600 | 178 | |||
| 50HS-C | thirty | 3/2 | M | 39.6~86.4 | 11~24 | twelve~sixty four | 1300~2700 | 214 |
| R | 36~seventy five.six | ten~21 | 13~46 | 1300~2300 | 213 | |||
| 75HS-C | thirty | 4/3 | M | 86.4~198 | 24~fifty five | nine~52 | 1000~2200 | 245 |
| R | seventy nine.2~one hundred eighty | 22~50 | 5~34.5 | 800~1800 | 245 | |||
| 100HS-D | sixty | six/4 | M | 162~360 | 40~100 | twelve~56 | 800~1550 | 365 |
| R | 144~324 | 40~90 | 12~forty five | 800~1350 | 365 | |||
| 150HS-E | a hundred and twenty | eight/6 | M | 360~828 | 100~230 | 10~61 | five hundred~1140 | 510 |
| R | 324~720 | ninety~200 | 7~forty nine | four hundred~1000 | 510 | |||
| 200MS-E | one hundred twenty | ten/eight | M | 666~1440 | 185~400 | fourteen~sixty | 600~1100 | 549 |
| 200HS-ST | 560 | ten/8 | M | 612~1368 | 170~380 | eleven~sixty one | 400~850 | 686 |
| R | 540~1188 | a hundred and fifty~330 | 12~fifty | 400~750 | 686 | |||
| 250HS-ST | 560 | twelve/10 | M | 936~1980 | 260~550 | 7~sixty eight | three hundred~800 | 762 |
| R | 720~1620 | two hundred~450 | seven~45 | 300~650 | 762 | |||
| 300HS-TU | 560 | fourteen/12 | M | 1260~2772 | 350~770 | thirteen~sixty three | three hundred~600 | 965 |
| R | 1152~2520 | 320~seven-hundred | 13~44 | three hundred~500 | 965 | |||
| 350HS-TU | 1200 | 16/14 | M | 1368~3060 | 380~850 | eleven~63 | 250~550 | 1067 |
| 450HS-TU | 1200 | twenty/eighteen | M | 2520~5400 | seven hundred~1500 | thirteen~fifty seven | 200~400 | 1370 |
| 25HHS-C | thirty | one.5/one | M | 16.two~34.two | 4.5~9.five | twenty five~ninety two | 1400~2200 | 330 |
| 50HHS-D | 60 | three/two | M | sixty eight.4~136.8 | 19~38 | 25~87 | 850~1400 | 457 |
| 75HHS-E | 120 | 4/three | M | 126~252 | 35~70 | twelve~ninety seven | 600~1400 | 508 |
| 100HHS-E | 120 | 6/four | M | 324~720 | 90~two hundred | thirty~118 | 600~a thousand | 711 |
| 150HHS-S | 560 | eight/6 | M | 468-1008 | a hundred thirty~280 | 20~94 | 500~a thousand | 711 |
For the substance of sporting elements,
“M” = metal, ultra chromium alloy “R” = anti-abrasive rubber
Speak to
Welcome to speak to us any time for specifics.
Your inquiry will get our prompt consideration and reaction !
