CZPT Horizontal Mining Minerals Processing Ultra Chrome Alloy Slurry Pump
Introduction:
one. HS series slurry pump is created for the continuous pumping of substantial abrasive, substantial density slurries with minimum upkeep demands. The putting on parts are produced of ultra chrome or and rubber. It will keep large efficiency above the use existence of its factors.
two. The steel soaked components and rubber ones can be interchangeable for handling various liquids or slurries.
three. HS slurry pumps are offered in measurements ranging from one inch to eighteen inch discharge and feature higher performance functionality able of stream charges from 10.8 to 5400 m³/h and heads up to a hundred twenty five meters for higher head versions.
Characteristics:
1. Cylindrical structure of bearing assembly: practical to alter the space amongst impeller and entrance liner
and can beremoved totally
2. Interchangeable anti-abrasive soaked elements produced of high-chrome alloys
three. Casing halves of ductile iron with exterior reinforcing ribs give high running stress capabilities
and an added measure of safety.
4. The discharge branch can be oriented to any eight positions at the interval of 45 degrees
five. A variety of generate kinds: DC(immediate relationship), V-belt push, gear box reducer, hydraulic couplings, VFD,
SCR management, and so on
six. The shaft seal employs the packing seal, expeller seal and mechanical seal
Typical Application:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Waste sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • CZPT |
| • Alumina Market | • Electrical power Plant | • Potash Fertilizer Plant | • Other industries |
| • Iron ore sand | • Copper Concentration | • Gold mine | •Molybdenum |
| Design | Max Power (Kw) |
Inlet & Outlet measurement (inch) | Materials for Use Parts | Flow Charge (Q) | Head (H) meter |
Pace (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | 15 | one.5/one | M | twelve.6~28.8 | 3.five~8 | six~sixty eight | 1200~3800 | 152 |
| R | ten.eight~25.two | 3~7 | seven~fifty two | 1400~3400 | 152 | |||
| 40HS-B | 15 | two/one.5 | M | 32.4~72 | 9~20 | six~58 | 1200~3200 | 184 |
| R | twenty five.2~fifty four | seven~fifteen | five.five~forty one | 1000~2600 | 178 | |||
| 50HS-C | thirty | 3/two | M | 39.6~86.4 | eleven~24 | twelve~64 | 1300~2700 | 214 |
| R | 36~75.6 | 10~21 | thirteen~forty six | 1300~2300 | 213 | |||
| 75HS-C | thirty | four/three | M | 86.4~198 | 24~fifty five | nine~52 | one thousand~2200 | 245 |
| R | seventy nine.two~one hundred eighty | 22~fifty | five~34.5 | 800~1800 | 245 | |||
| 100HS-D | sixty | six/four | M | 162~360 | 40~a hundred | twelve~56 | 800~1550 | 365 |
| R | 144~324 | forty~ninety | twelve~45 | 800~1350 | 365 | |||
| 150HS-E | a hundred and twenty | 8/6 | M | 360~828 | a hundred~230 | ten~61 | 500~1140 | 510 |
| R | 324~720 | 90~200 | 7~49 | four hundred~1000 | 510 | |||
| 200MS-E | a hundred and twenty | 10/8 | M | 666~1440 | 185~400 | 14~60 | 600~1100 | 549 |
| 200HS-ST | 560 | 10/8 | M | 612~1368 | a hundred and seventy~380 | 11~61 | 400~850 | 686 |
| R | 540~1188 | one hundred fifty~330 | twelve~fifty | four hundred~750 | 686 | |||
| 250HS-ST | 560 | 12/10 | M | 936~1980 | 260~550 | 7~68 | three hundred~800 | 762 |
| R | 720~1620 | 200~450 | seven~45 | 300~650 | 762 | |||
| 300HS-TU | 560 | fourteen/12 | M | 1260~2772 | 350~770 | thirteen~sixty three | three hundred~600 | 965 |
| R | 1152~2520 | 320~700 | 13~forty four | three hundred~five hundred | 965 | |||
| 350HS-TU | 1200 | 16/fourteen | M | 1368~3060 | 380~850 | 11~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | twenty/eighteen | M | 2520~5400 | 700~1500 | thirteen~57 | 200~400 | 1370 |
| 25HHS-C | 30 | one.five/1 | M | sixteen.two~34.2 | 4.five~9.five | 25~ninety two | 1400~2200 | 330 |
| 50HHS-D | 60 | 3/2 | M | sixty eight.four~136.eight | 19~38 | twenty five~87 | 850~1400 | 457 |
| 75HHS-E | one hundred twenty | four/3 | M | 126~252 | 35~70 | twelve~ninety seven | 600~1400 | 508 |
| 100HHS-E | 120 | six/four | M | 324~720 | ninety~200 | thirty~118 | 600~one thousand | 711 |
| 150HHS-S | 560 | 8/6 | M | 468-1008 | one hundred thirty~280 | twenty~ninety four | five hundred~one thousand | 711 |
For the materials of sporting components,
“M” = metallic, ultra chromium alloy “R” = anti-abrasive rubber
Welcome to contact us any time for particulars.
Your inquiry will get our prompt interest and reaction !
