Centrifugal Horizontal Slurry Pums Introduction:
one. HS series slurry pump is created for the continuous pumping of large abrasive, large density slurries with small maintenance requirements. The sporting elements are made of ultra chrome alloy or rubber. It will keep higher efficiency over the dress in daily life of its factors.
2. The metal moist parts and rubber types can be interchangeable for managing different liquids or slurries.
3. HS slurry pumps are offered in dimensions ranging from one inch to 18 inch discharge and characteristic substantial effectiveness efficiency able of movement charges from ten.eight to 5400 m³/h and heads up to 125 meters for high head designs.
four. Polyurethane Areas can be interchangeable with rubber ones.
Functions:
one. Cylindrical framework of bearing assembly: handy to adjust the area in between impeller and entrance liner
and can beremoved totally
two. Interchangeable anti-abrasive damp components manufactured of large-chrome alloys
3. Casing halves of ductile iron with exterior reinforcing ribs give high working strain capabilities
and an further measure of security.
4. The discharge department can be oriented to any 8 positions at the interval of forty five levels
five. Different push types: DC(direct relationship), V-belt generate, equipment box reducer, hydraulic couplings, VFD,
SCR control, and so on
six. The shaft seal makes use of the packing seal, expeller seal and mechanical seal
Normal Software:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Waste sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • CZPT |
| • Alumina Sector | • Power Plant | • Potash Fertilizer Plant | • Other industries |
| • Iron ore sand | • Copper Focus | • Gold mine | •Molybdenum |
| Model | Max Electrical power (Kw) |
Inlet & Outlet size (inch) | Material for Use Components | Movement Charge (Q) | Head (H) meter |
Velocity (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | 15 | 1.5/one | M | twelve.6~28.8 | 3.five~8 | six~68 | 1200~3800 | 152 |
| R | ten.eight~25.two | three~seven | 7~fifty two | 1400~3400 | 152 | |||
| 40HS-B | 15 | two/1.5 | M | 32.4~seventy two | 9~20 | six~fifty eight | 1200~3200 | 184 |
| R | twenty five.2~54 | seven~15 | 5.5~41 | a thousand~2600 | 178 | |||
| 50HS-C | thirty | 3/2 | M | 39.six~86.four | 11~24 | twelve~64 | 1300~2700 | 214 |
| R | 36~75.six | 10~21 | 13~forty six | 1300~2300 | 213 | |||
| 75HS-C | thirty | four/three | M | 86.4~198 | 24~55 | nine~fifty two | one thousand~2200 | 245 |
| R | 79.2~one hundred eighty | 22~fifty | five~34.five | 800~1800 | 245 | |||
| 100HS-D | 60 | 6/four | M | 162~360 | forty~100 | twelve~56 | 800~1550 | 365 |
| R | a hundred and forty four~324 | 40~ninety | twelve~45 | 800~1350 | 365 | |||
| 150HS-E | one hundred twenty | eight/six | M | 360~828 | a hundred~230 | ten~sixty one | five hundred~1140 | 510 |
| R | 324~720 | ninety~two hundred | seven~49 | four hundred~1000 | 510 | |||
| 200MS-E | one hundred twenty | ten/8 | M | 666~1440 | 185~400 | fourteen~sixty | 600~1100 | 549 |
| 200HS-ST | 560 | ten/eight | M | 612~1368 | a hundred and seventy~380 | eleven~sixty one | four hundred~850 | 686 |
| R | 540~1188 | 150~330 | twelve~fifty | four hundred~750 | 686 | |||
| 250HS-ST | 560 | twelve/10 | M | 936~1980 | 260~550 | seven~68 | three hundred~800 | 762 |
| R | 720~1620 | 200~450 | 7~45 | three hundred~650 | 762 | |||
| 300HS-TU | 560 | fourteen/twelve | M | 1260~2772 | 350~770 | 13~sixty three | three hundred~600 | 965 |
| R | 1152~2520 | 320~seven-hundred | thirteen~44 | 300~500 | 965 | |||
| 350HS-TU | 1200 | 16/fourteen | M | 1368~3060 | 380~850 | 11~63 | 250~550 | 1067 |
| 450HS-TU | 1200 | twenty/18 | M | 2520~5400 | 700~1500 | 13~57 | two hundred~400 | 1370 |
| 25HHS-C | thirty | 1.five/one | M | 16.two~34.two | four.five~nine.5 | 25~92 | 1400~2200 | 330 |
| 50HHS-D | sixty | 3/2 | M | 68.4~136.8 | 19~38 | twenty five~87 | 850~1400 | 457 |
| 75HHS-E | 120 | 4/three | M | 126~252 | 35~70 | 12~97 | 600~1400 | 508 |
| 100HHS-E | one hundred twenty | six/four | M | 324~720 | ninety~two hundred | thirty~118 | 600~one thousand | 711 |
| 150HHS-S | 560 | eight/six | M | 468-1008 | a hundred thirty~280 | 20~ninety four | 500~a thousand | 711 |
For the substance of sporting parts,
“M” = metal, ultra chromium alloy “R” = anti-abrasive rubber
Welcome to get in touch with us 7×24 for more information.
Any of your inquiry or guidance will get our prompt focus and response !
