Introduction:
1. HS series slurry pump is made for the continuous pumping of high abrasive, large density slurries with minimal maintenance requirements. The putting on areas are made of ultra chrome or and rubber. It will keep higher efficiency above the put on daily life of its elements.
2. The metallic wet elements and rubber types can be interchangeable for handling distinct liquids or slurries.
3. HS slurry pumps are obtainable in dimensions ranging from one inch to 18 inch discharge and feature substantial efficiency efficiency able of stream charges from ten.eight to 5400 m³/h and heads up to 125 meters for substantial head models.
Attributes:
1. Cylindrical framework of bearing assembly: handy to modify the place amongst impeller and entrance liner
and can beremoved completely
2. Interchangeable anti-abrasive soaked elements produced of higher-chrome alloys
three. Casing halves of ductile iron with external reinforcing ribs offer substantial functioning stress abilities
and an further measure of basic safety.
4. The discharge department can be oriented to any eight positions at the interval of forty five levels
5. Numerous drive varieties: DC(direct link), V-belt drive, equipment box reducer, hydraulic couplings, VFD,
SCR handle, and many others
6. The shaft seal employs the packing seal, expeller seal and mechanical seal
Common Software:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Waste sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • CZPT |
| • Alumina Business | • Electricity Plant | • Potash Fertilizer Plant | • Other industries |
| • Iron ore sand | • Copper Concentration | • Gold mine | •Molybdenum |
| Design | Max Electrical power (Kw) |
Inlet & Outlet dimensions (inch) | Substance for Wear Components | Stream Rate (Q) | Head (H) meter |
Speed (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | fifteen | one.five/1 | M | twelve.six~28.eight | 3.5~8 | six~sixty eight | 1200~3800 | 152 |
| R | 10.8~25.two | 3~seven | seven~52 | 1400~3400 | 152 | |||
| 40HS-B | fifteen | two/1.five | M | 32.four~72 | 9~twenty | 6~fifty eight | 1200~3200 | 184 |
| R | twenty five.2~fifty four | seven~15 | 5.five~forty one | 1000~2600 | 178 | |||
| 50HS-C | thirty | three/2 | M | 39.6~86.4 | 11~24 | 12~sixty four | 1300~2700 | 214 |
| R | 36~seventy five.6 | ten~21 | 13~46 | 1300~2300 | 213 | |||
| 75HS-C | thirty | 4/3 | M | 86.four~198 | 24~55 | 9~fifty two | 1000~2200 | 245 |
| R | 79.two~180 | 22~50 | five~34.five | 800~1800 | 245 | |||
| 100HS-D | sixty | six/4 | M | 162~360 | forty~one hundred | 12~56 | 800~1550 | 365 |
| R | one hundred forty four~324 | 40~ninety | twelve~45 | 800~1350 | 365 | |||
| 150HS-E | one hundred twenty | 8/6 | M | 360~828 | a hundred~230 | ten~61 | 500~1140 | 510 |
| R | 324~720 | 90~two hundred | 7~forty nine | 400~a thousand | 510 | |||
| 200MS-E | 120 | 10/eight | M | 666~1440 | 185~400 | 14~60 | 600~1100 | 549 |
| 200HS-ST | 560 | 10/8 | M | 612~1368 | a hundred and seventy~380 | eleven~61 | four hundred~850 | 686 |
| R | 540~1188 | a hundred and fifty~330 | 12~50 | 400~750 | 686 | |||
| 250HS-ST | 560 | twelve/ten | M | 936~1980 | 260~550 | seven~sixty eight | 300~800 | 762 |
| R | 720~1620 | 200~450 | 7~45 | 300~650 | 762 | |||
| 300HS-TU | 560 | 14/twelve | M | 1260~2772 | 350~770 | 13~63 | three hundred~600 | 965 |
| R | 1152~2520 | 320~seven-hundred | thirteen~44 | 300~five hundred | 965 | |||
| 350HS-TU | 1200 | sixteen/14 | M | 1368~3060 | 380~850 | 11~63 | 250~550 | 1067 |
| 450HS-TU | 1200 | 20/18 | M | 2520~5400 | 700~1500 | thirteen~fifty seven | two hundred~400 | 1370 |
| 25HHS-C | 30 | 1.five/1 | M | sixteen.2~34.2 | four.5~nine.five | twenty five~92 | 1400~2200 | 330 |
| 50HHS-D | sixty | three/two | M | sixty eight.4~136.8 | 19~38 | twenty five~87 | 850~1400 | 457 |
| 75HHS-E | one hundred twenty | 4/three | M | 126~252 | 35~70 | 12~97 | 600~1400 | 508 |
| 100HHS-E | a hundred and twenty | six/4 | M | 324~720 | ninety~two hundred | 30~118 | 600~a thousand | 711 |
| 150HHS-S | 560 | 8/six | M | 468-1008 | 130~280 | 20~ninety four | 500~a thousand | 711 |
For the material of wearing elements,
“M” = metallic, ultra chromium alloy “R” = anti-abrasive rubber
Welcome to make contact with us any time for specifics.
Your inquiry will get our prompt focus and response !
