Centrifugal Horizontal Extremely Chrome alloy AH Slurry Pump
Introduction:
1. HS series slurry pump is created for the continuous pumping of substantial abrasive, higher density slurries with minimum routine maintenance requirements. The putting on components are created of extremely chrome or and rubber. It will keep higher performance above the dress in existence of its factors.
two. The metallic wet elements and rubber ones can be interchangeable for handling different liquids or slurries.
three. HS slurry pumps are available in dimensions ranging from 1 inch to eighteen inch discharge and attribute higher effectiveness performance capable of movement costs from 10.8 to 5400 m³/h and heads up to one hundred twenty five meters for large head models.
Characteristics:
one. Cylindrical composition of bearing assembly: practical to alter the place between impeller and front liner
and can beremoved totally
2. Interchangeable anti-abrasive soaked areas produced of higher-chrome alloys
three. Casing halves of ductile iron with exterior reinforcing ribs supply substantial operating pressure abilities
and an additional evaluate of security.
four. The discharge branch can be oriented to any 8 positions at the interval of 45 levels
five. Numerous travel sorts: DC(immediate connection), V-belt drive, equipment box reducer, hydraulic couplings, VFD,
SCR management, and so on
6. The shaft seal utilizes the packing seal, expeller seal and mechanical seal
Typical Software:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Waste sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • CZPT |
| • Alumina Business | • Energy Plant | • Potash Fertilizer Plant | • Other industries |
| • Iron ore sand | • Copper Focus | • Gold mine | •Molybdenum |
| Product | Max Power (Kw) |
Inlet & Outlet measurement (inch) | Materials for Dress in Elements | Flow Rate (Q) | Head (H) meter |
Pace (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | 15 | one.five/1 | M | twelve.6~28.eight | 3.5~eight | 6~sixty eight | 1200~3800 | 152 |
| R | ten.8~twenty five.2 | 3~7 | seven~52 | 1400~3400 | 152 | |||
| 40HS-B | fifteen | two/1.five | M | 32.four~seventy two | nine~twenty | six~fifty eight | 1200~3200 | 184 |
| R | 25.2~54 | 7~fifteen | 5.5~41 | a thousand~2600 | 178 | |||
| 50HS-C | thirty | three/2 | M | 39.six~86.4 | 11~24 | twelve~64 | 1300~2700 | 214 |
| R | 36~seventy five.six | ten~21 | thirteen~46 | 1300~2300 | 213 | |||
| 75HS-C | 30 | 4/three | M | 86.four~198 | 24~fifty five | 9~52 | one thousand~2200 | 245 |
| R | 79.two~a hundred and eighty | 22~50 | five~34.5 | 800~1800 | 245 | |||
| 100HS-D | sixty | six/4 | M | 162~360 | 40~100 | twelve~56 | 800~1550 | 365 |
| R | one hundred forty four~324 | forty~ninety | twelve~45 | 800~1350 | 365 | |||
| 150HS-E | one hundred twenty | eight/six | M | 360~828 | a hundred~230 | ten~61 | five hundred~1140 | 510 |
| R | 324~720 | ninety~200 | 7~49 | 400~a thousand | 510 | |||
| 200MS-E | 120 | 10/8 | M | 666~1440 | 185~400 | 14~sixty | 600~1100 | 549 |
| 200HS-ST | 560 | 10/eight | M | 612~1368 | one hundred seventy~380 | 11~61 | 400~850 | 686 |
| R | 540~1188 | 150~330 | twelve~50 | four hundred~750 | 686 | |||
| 250HS-ST | 560 | twelve/ten | M | 936~1980 | 260~550 | 7~sixty eight | 300~800 | 762 |
| R | 720~1620 | 200~450 | 7~forty five | three hundred~650 | 762 | |||
| 300HS-TU | 560 | 14/twelve | M | 1260~2772 | 350~770 | 13~sixty three | 300~600 | 965 |
| R | 1152~2520 | 320~700 | thirteen~44 | three hundred~five hundred | 965 | |||
| 350HS-TU | 1200 | 16/fourteen | M | 1368~3060 | 380~850 | 11~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | 20/eighteen | M | 2520~5400 | seven hundred~1500 | thirteen~fifty seven | 200~four hundred | 1370 |
| 25HHS-C | 30 | 1.5/1 | M | sixteen.2~34.two | 4.five~nine.5 | 25~ninety two | 1400~2200 | 330 |
| 50HHS-D | 60 | three/2 | M | sixty eight.4~136.8 | 19~38 | twenty five~87 | 850~1400 | 457 |
| 75HHS-E | a hundred and twenty | four/three | M | 126~252 | 35~70 | 12~ninety seven | 600~1400 | 508 |
| 100HHS-E | 120 | 6/4 | M | 324~720 | ninety~200 | thirty~118 | 600~1000 | 711 |
| 150HHS-S | 560 | 8/6 | M | 468-1008 | a hundred thirty~280 | twenty~94 | 500~one thousand | 711 |
For the content of wearing components,
“M” = steel, ultra chromium alloy “R” = anti-abrasive rubber
Contact
Welcome to speak to us any time for information.
Your inquiry will get our prompt interest and reaction !
