Centrifugal Horizontal Slurry Pums Introduction:
1. HS series slurry pump is designed for the steady pumping of large abrasive, higher density slurries with minimal upkeep specifications. The sporting components are produced of ultra chrome alloy or rubber. It will maintain substantial performance over the wear existence of its factors.
two. The steel damp elements and rubber types can be interchangeable for dealing with various liquids or slurries.
three. HS slurry pumps are available in measurements ranging from one inch to 18 inch discharge and feature higher effectiveness overall performance capable of circulation rates from ten.eight to 5400 m³/h and heads up to 125 meters for high head versions.
four. Polyurethane Parts can be interchangeable with rubber ones.
Attributes:
one. Cylindrical structure of bearing assembly: practical to change the room amongst impeller and front liner
and can beremoved totally
2. Interchangeable anti-abrasive soaked elements produced of higher-chrome alloys
three. Casing halves of ductile iron with external reinforcing ribs supply high working force capabilities
and an additional evaluate of safety.
4. The discharge department can be oriented to any eight positions at the interval of forty five levels
five. Different generate kinds: DC(direct link), V-belt travel, equipment box reducer, hydraulic couplings, VFD,
SCR control, and so forth
6. The shaft seal makes use of the packing seal, expeller seal and mechanical seal
Standard Software:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Squander sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • CZPT |
| • Alumina Market | • Electricity Plant | • Potash Fertilizer Plant | • Other industries |
| • Iron ore sand | • Copper Concentration | • Gold mine | •Molybdenum |
| Design | Max Electrical power (Kw) |
Inlet & Outlet dimensions (inch) | Material for Use Areas | Flow Fee (Q) | Head (H) meter |
Speed (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | 15 | 1.five/one | M | twelve.6~28.8 | 3.five~eight | 6~68 | 1200~3800 | 152 |
| R | ten.eight~twenty five.two | 3~7 | seven~52 | 1400~3400 | 152 | |||
| 40HS-B | fifteen | 2/1.5 | M | 32.4~72 | nine~twenty | 6~fifty eight | 1200~3200 | 184 |
| R | twenty five.two~fifty four | 7~fifteen | 5.5~41 | one thousand~2600 | 178 | |||
| 50HS-C | 30 | three/2 | M | 39.6~86.four | 11~24 | twelve~64 | 1300~2700 | 214 |
| R | 36~75.6 | ten~21 | 13~46 | 1300~2300 | 213 | |||
| 75HS-C | 30 | 4/three | M | 86.four~198 | 24~55 | nine~52 | one thousand~2200 | 245 |
| R | 79.two~180 | 22~50 | 5~34.5 | 800~1800 | 245 | |||
| 100HS-D | 60 | six/4 | M | 162~360 | 40~a hundred | twelve~fifty six | 800~1550 | 365 |
| R | a hundred and forty four~324 | forty~90 | twelve~45 | 800~1350 | 365 | |||
| 150HS-E | 120 | 8/six | M | 360~828 | 100~230 | 10~61 | five hundred~1140 | 510 |
| R | 324~720 | 90~200 | seven~forty nine | 400~1000 | 510 | |||
| 200MS-E | one hundred twenty | 10/8 | M | 666~1440 | 185~400 | 14~sixty | 600~1100 | 549 |
| 200HS-ST | 560 | 10/8 | M | 612~1368 | 170~380 | eleven~61 | four hundred~850 | 686 |
| R | 540~1188 | 150~330 | twelve~fifty | 400~750 | 686 | |||
| 250HS-ST | 560 | twelve/10 | M | 936~1980 | 260~550 | 7~sixty eight | 300~800 | 762 |
| R | 720~1620 | two hundred~450 | seven~forty five | 300~650 | 762 | |||
| 300HS-TU | 560 | 14/twelve | M | 1260~2772 | 350~770 | thirteen~63 | three hundred~600 | 965 |
| R | 1152~2520 | 320~seven-hundred | 13~44 | 300~500 | 965 | |||
| 350HS-TU | 1200 | 16/fourteen | M | 1368~3060 | 380~850 | eleven~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | 20/18 | M | 2520~5400 | 700~1500 | thirteen~fifty seven | two hundred~four hundred | 1370 |
| 25HHS-C | 30 | 1.five/one | M | 16.two~34.two | 4.5~9.five | 25~92 | 1400~2200 | 330 |
| 50HHS-D | 60 | three/two | M | sixty eight.four~136.8 | 19~38 | twenty five~87 | 850~1400 | 457 |
| 75HHS-E | 120 | 4/three | M | 126~252 | 35~70 | twelve~97 | 600~1400 | 508 |
| 100HHS-E | a hundred and twenty | six/4 | M | 324~720 | 90~200 | thirty~118 | 600~one thousand | 711 |
| 150HHS-S | 560 | 8/6 | M | 468-1008 | one hundred thirty~280 | 20~ninety four | 500~a thousand | 711 |
For the materials of putting on elements,
“M” = steel, extremely chromium alloy “R” = anti-abrasive rubber
Welcome to speak to us 7×24 for a lot more details.
Any of your inquiry or advice will get our prompt interest and reaction !
