Centrifugal Horizontal Slurry Pums Introduction:
one. HS series slurry pump is created for the ongoing pumping of high abrasive, large density slurries with minimum routine maintenance requirements. The wearing components are manufactured of ultra chrome alloy or rubber. It will preserve higher performance more than the put on life of its elements.
2. The metal moist parts and rubber ones can be interchangeable for handling diverse liquids or slurries.
3. HS slurry pumps are obtainable in dimensions ranging from one inch to eighteen inch discharge and attribute high effectiveness overall performance able of stream rates from 10.8 to 5400 m³/h and heads up to one hundred twenty five meters for substantial head versions.
four. Polyurethane Elements can be interchangeable with rubber types.
Attributes:
one. Cylindrical construction of bearing assembly: handy to alter the place amongst impeller and entrance liner
and can beremoved completely
two. Interchangeable anti-abrasive moist areas manufactured of substantial-chrome alloys
three. Casing halves of ductile iron with external reinforcing ribs provide higher operating stress capabilities
and an extra evaluate of security.
four. The discharge branch can be oriented to any 8 positions at the interval of 45 levels
5. A variety of generate types: DC(immediate relationship), V-belt travel, equipment box reducer, hydraulic couplings, VFD,
SCR handle, and so on
6. The shaft seal makes use of the packing seal, expeller seal and mechanical seal
Typical Software:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Waste sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • CZPT |
| • Alumina Market | • Energy Plant | • Potash Fertilizer Plant | • Other industries |
| • Iron ore sand | • Copper Focus | • Gold mine | •Molybdenum |
| Model | Max Electrical power (Kw) |
Inlet & Outlet dimension (inch) | Material for Dress in Parts | Circulation Fee (Q) | Head (H) meter |
Pace (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | fifteen | one.5/1 | M | 12.6~28.eight | three.five~eight | 6~sixty eight | 1200~3800 | 152 |
| R | ten.eight~25.2 | 3~7 | 7~fifty two | 1400~3400 | 152 | |||
| 40HS-B | fifteen | 2/one.five | M | 32.4~seventy two | 9~twenty | six~fifty eight | 1200~3200 | 184 |
| R | twenty five.2~fifty four | seven~15 | five.five~41 | one thousand~2600 | 178 | |||
| 50HS-C | thirty | 3/two | M | 39.six~86.four | 11~24 | 12~sixty four | 1300~2700 | 214 |
| R | 36~75.6 | 10~21 | 13~forty six | 1300~2300 | 213 | |||
| 75HS-C | 30 | 4/three | M | 86.four~198 | 24~fifty five | nine~52 | a thousand~2200 | 245 |
| R | 79.two~a hundred and eighty | 22~fifty | five~34.5 | 800~1800 | 245 | |||
| 100HS-D | 60 | 6/4 | M | 162~360 | forty~one hundred | 12~fifty six | 800~1550 | 365 |
| R | a hundred and forty four~324 | 40~90 | 12~45 | 800~1350 | 365 | |||
| 150HS-E | a hundred and twenty | 8/6 | M | 360~828 | 100~230 | 10~sixty one | five hundred~1140 | 510 |
| R | 324~720 | ninety~two hundred | seven~49 | four hundred~one thousand | 510 | |||
| 200MS-E | 120 | 10/8 | M | 666~1440 | 185~four hundred | fourteen~sixty | 600~1100 | 549 |
| 200HS-ST | 560 | ten/8 | M | 612~1368 | 170~380 | 11~61 | four hundred~850 | 686 |
| R | 540~1188 | one hundred fifty~330 | twelve~50 | 400~750 | 686 | |||
| 250HS-ST | 560 | twelve/10 | M | 936~1980 | 260~550 | 7~sixty eight | three hundred~800 | 762 |
| R | 720~1620 | 200~450 | seven~forty five | 300~650 | 762 | |||
| 300HS-TU | 560 | fourteen/12 | M | 1260~2772 | 350~770 | 13~sixty three | 300~600 | 965 |
| R | 1152~2520 | 320~seven-hundred | thirteen~forty four | 300~500 | 965 | |||
| 350HS-TU | 1200 | sixteen/14 | M | 1368~3060 | 380~850 | 11~63 | 250~550 | 1067 |
| 450HS-TU | 1200 | twenty/eighteen | M | 2520~5400 | 700~1500 | thirteen~57 | 200~400 | 1370 |
| 25HHS-C | 30 | one.5/1 | M | sixteen.2~34.two | four.5~nine.5 | 25~92 | 1400~2200 | 330 |
| 50HHS-D | 60 | 3/two | M | 68.4~136.eight | 19~38 | twenty five~87 | 850~1400 | 457 |
| 75HHS-E | one hundred twenty | four/three | M | 126~252 | 35~70 | twelve~ninety seven | 600~1400 | 508 |
| 100HHS-E | one hundred twenty | six/four | M | 324~720 | 90~two hundred | thirty~118 | 600~a thousand | 711 |
| 150HHS-S | 560 | eight/6 | M | 468-1008 | a hundred thirty~280 | 20~94 | five hundred~a thousand | 711 |
For the content of putting on components,
“M” = metallic, extremely chromium alloy “R” = anti-abrasive rubber
Welcome to contact us 7×24 for more information.
Any of your inquiry or guidance will get our prompt interest and response !
