Supermarket Steel Shelf Storage Deck Panel Roll Forming Device
Shelf forming machine is HangCZPT Bosj CZPT Co.,Ltd. According to market demand by thecollection year production cold rolling equipment experience independently designs a series or products.
BOSJ provide storage method generation traces,such as :
Structure of Heavy Duty Pallet Racking.
Beams
Horizontal bracing
Diagonal bracing
Uprights
Screw, safe pins
Protector
Trays ,pallets ,or steel mesh plates
BOSJ shelf rack beam panel forming device positive aspects:
one. Totally Automated
two. Decrease Labor Cost: Only one employee is necessary to work the equipment.
three. Effortless Operation: Controlled by PLC control program
four: High Security Factor: There is no actual physical make contact with between end users and device hazardous parts in the approach of production.
CZPT structure
The equipment is consisted with auto-de-coiler, guide frame, lever/feeding section, continuous bottom hole punching section, forming section, positioning and cutting section, collection table and electrical control system etc.
Main Device Parameter
| Technical Datas roll forming machine | ||
| 1 | Material width | As your regards |
| 2 | The effective width | As your regards |
| three | The thickness of Coil | one.-three.0mm or more |
| 4 | Software | wall sheet and roof sheet |
| 5 | The overall dimensions | 6800mmX1500mmX1300mm |
| six | Total weight | 5 Tons |
| 7 | Main Power | 5.5 KW |
| eight | Uncoiler | Manual Uncoiler |
| 9 | Inner diameter | 508–610mm |
| 10 | Outer diameter | 1200mm |
| 11 | Loading weight | 3T |
| 12 | Forming speed | five-10m/min |
| 13 | Forming steps | 12 stations or more |
| 14 | Bracket | welded with 36 # I-metal |
| fifteen | Material of Shafts | forty five# steel with rough finished and then refined finished |
| sixteen | Diameter of the Roll | 76mm |
| 17 | Material of Rolls | high quality 45#steel coated with hard chromium 0.05 mm |
| 18 | Processing CZPT | rough processing —refined processing–Hard Chromium Plating. |
| 19 | Material of Rack | complete welded structure of A3 steel plate 16mm thickness |
| twenty | Transmission | Transmitted by the chain-bracket/ Gearbox T180 |
| 21 | Material of Chain | forty five#steel with heat treatment of HRC45-50° |
| 22 | Holders under chain for lubricant | By the machine |
| 23 | Material of cutting blade | Cr12 with quenched treatment 60-sixty two |
| 24 | Cutting system | CZPT cutting |
| twenty five | Voltage | 380V/50HZ/3phase |
Machine parts
one- Decoiler
two- main roll forming machine
Thank you for your Consideration!
Remember to ship your inquiry to us.
You can click“Ship” Now!
