hefty obligation put on risistance A05 DSAH horizontal centrifugal slurry pump
Introduction:
one. HS series slurry pump is made for the constant pumping of substantial abrasive, substantial density slurries with minimal servicing requirements. The donning parts are manufactured of extremely chrome or and rubber. It will keep large efficiency in excess of the dress in daily life of its factors.
two. The metal soaked parts and rubber types can be interchangeable for managing different liquids or slurries.
3. HS slurry pumps are available in measurements ranging from 1 inch to 18 inch discharge and feature higher effectiveness functionality able of movement rates from 10.8 to 5400 m³/h and heads up to a hundred twenty five meters for higher head types.
Features:
1. Cylindrical structure of bearing assembly: hassle-free to change the room among impeller and front liner
and can beremoved fully
two. Interchangeable anti-abrasive damp components made of large-chrome alloys
3. Casing halves of ductile iron with exterior reinforcing ribs supply substantial operating pressure abilities
and an added evaluate of safety.
four. The discharge branch can be oriented to any 8 positions at the interval of 45 levels
5. Different drive kinds: DC(immediate connection), V-belt push, equipment box reducer, hydraulic couplings, VFD,
SCR control, etc
six. The shaft seal utilizes the packing seal, expeller seal and mechanical seal
Standard Software:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Squander sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • CZPT |
| • Alumina Market | • Power Plant | • Potash Fertilizer Plant | • Other industries |
| • Iron ore sand | • Copper Concentration | • Gold mine | •Molybdenum |
| Model | Max Electrical power (Kw) |
Inlet & Outlet size (inch) | Substance for Use Areas | Circulation Rate (Q) | Head (H) meter |
Velocity (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | fifteen | 1.five/one | M | 12.six~28.eight | three.five~eight | six~68 | 1200~3800 | 152 |
| R | ten.8~25.2 | 3~7 | 7~fifty two | 1400~3400 | 152 | |||
| 40HS-B | fifteen | 2/one.5 | M | 32.four~seventy two | 9~20 | six~58 | 1200~3200 | 184 |
| R | 25.two~fifty four | 7~fifteen | five.5~41 | a thousand~2600 | 178 | |||
| 50HS-C | thirty | three/2 | M | 39.6~86.4 | 11~24 | 12~64 | 1300~2700 | 214 |
| R | 36~75.6 | 10~21 | thirteen~46 | 1300~2300 | 213 | |||
| 75HS-C | 30 | four/3 | M | 86.4~198 | 24~fifty five | 9~52 | one thousand~2200 | 245 |
| R | seventy nine.two~a hundred and eighty | 22~fifty | five~34.five | 800~1800 | 245 | |||
| 100HS-D | 60 | 6/four | M | 162~360 | 40~100 | 12~56 | 800~1550 | 365 |
| R | 144~324 | forty~ninety | twelve~forty five | 800~1350 | 365 | |||
| 150HS-E | 120 | 8/six | M | 360~828 | one hundred~230 | 10~sixty one | five hundred~1140 | 510 |
| R | 324~720 | ninety~200 | 7~forty nine | 400~one thousand | 510 | |||
| 200MS-E | 120 | 10/eight | M | 666~1440 | 185~four hundred | 14~sixty | 600~1100 | 549 |
| 200HS-ST | 560 | 10/8 | M | 612~1368 | 170~380 | eleven~sixty one | four hundred~850 | 686 |
| R | 540~1188 | a hundred and fifty~330 | 12~50 | 400~750 | 686 | |||
| 250HS-ST | 560 | twelve/ten | M | 936~1980 | 260~550 | 7~68 | three hundred~800 | 762 |
| R | 720~1620 | 200~450 | seven~forty five | three hundred~650 | 762 | |||
| 300HS-TU | 560 | 14/twelve | M | 1260~2772 | 350~770 | thirteen~sixty three | 300~600 | 965 |
| R | 1152~2520 | 320~700 | thirteen~44 | three hundred~500 | 965 | |||
| 350HS-TU | 1200 | 16/fourteen | M | 1368~3060 | 380~850 | eleven~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | twenty/eighteen | M | 2520~5400 | seven-hundred~1500 | thirteen~fifty seven | 200~four hundred | 1370 |
| 25HHS-C | thirty | one.5/one | M | 16.2~34.two | 4.five~nine.5 | twenty five~ninety two | 1400~2200 | 330 |
| 50HHS-D | sixty | 3/2 | M | sixty eight.4~136.eight | 19~38 | 25~87 | 850~1400 | 457 |
| 75HHS-E | a hundred and twenty | 4/three | M | 126~252 | 35~70 | 12~ninety seven | 600~1400 | 508 |
| 100HHS-E | 120 | 6/4 | M | 324~720 | 90~200 | thirty~118 | 600~one thousand | 711 |
| 150HHS-S | 560 | 8/six | M | 468-1008 | 130~280 | 20~ninety four | five hundred~one thousand | 711 |
For the substance of donning elements,
“M” = metallic, extremely chromium alloy “R” = anti-abrasive rubber
Speak to
Welcome to contact us any time for details.
Your inquiry will get our prompt interest and response !
