Introduction:
1. HS series slurry pump is designed for the ongoing pumping of high abrasive, high density slurries with minimal routine maintenance requirements. The sporting components are created of extremely chrome or and rubber. It will keep high efficiency over the put on lifestyle of its factors.
two. The steel wet areas and rubber types can be interchangeable for dealing with distinct liquids or slurries.
three. HS slurry pumps are obtainable in measurements ranging from one inch to 18 inch discharge and characteristic high efficiency overall performance able of circulation prices from ten.eight to 5400 m³/h and heads up to one hundred twenty five meters for high head designs.
Attributes:
1. Cylindrical composition of bearing assembly: hassle-free to modify the room among impeller and entrance liner
and can beremoved totally
two. Interchangeable anti-abrasive soaked areas made of large-chrome alloys
three. Casing halves of ductile iron with external reinforcing ribs provide high operating pressure abilities
and an additional evaluate of safety.
four. The discharge department can be oriented to any 8 positions at the interval of forty five degrees
five. Various drive kinds: DC(immediate link), V-belt drive, gear box reducer, hydraulic couplings, VFD,
SCR management, etc
6. The shaft seal uses the packing seal, expeller seal and mechanical seal
Standard Application:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Waste sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • CZPT |
| • Alumina Industry | • Electricity Plant | • Potash Fertilizer Plant | • Other industries |
| • Iron ore sand | • Copper Focus | • Gold mine | •Molybdenum |
| Model | Max Electrical power (Kw) |
Inlet & Outlet dimension (inch) | Content for Dress in Elements | Movement Charge (Q) | Head (H) meter |
Pace (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | 15 | one.5/1 | M | 12.six~28.eight | three.five~eight | six~68 | 1200~3800 | 152 |
| R | ten.8~twenty five.two | 3~7 | seven~fifty two | 1400~3400 | 152 | |||
| 40HS-B | fifteen | 2/one.5 | M | 32.4~72 | nine~20 | 6~fifty eight | 1200~3200 | 184 |
| R | twenty five.two~54 | 7~15 | five.5~41 | a thousand~2600 | 178 | |||
| 50HS-C | 30 | three/two | M | 39.6~86.4 | eleven~24 | 12~sixty four | 1300~2700 | 214 |
| R | 36~75.6 | 10~21 | thirteen~forty six | 1300~2300 | 213 | |||
| 75HS-C | thirty | 4/3 | M | 86.four~198 | 24~55 | nine~52 | a thousand~2200 | 245 |
| R | seventy nine.2~a hundred and eighty | 22~fifty | 5~34.five | 800~1800 | 245 | |||
| 100HS-D | sixty | six/4 | M | 162~360 | 40~a hundred | twelve~fifty six | 800~1550 | 365 |
| R | 144~324 | forty~ninety | twelve~45 | 800~1350 | 365 | |||
| 150HS-E | a hundred and twenty | eight/6 | M | 360~828 | one hundred~230 | 10~61 | 500~1140 | 510 |
| R | 324~720 | ninety~two hundred | 7~forty nine | 400~one thousand | 510 | |||
| 200MS-E | a hundred and twenty | ten/8 | M | 666~1440 | 185~four hundred | fourteen~sixty | 600~1100 | 549 |
| 200HS-ST | 560 | 10/8 | M | 612~1368 | a hundred and seventy~380 | 11~sixty one | 400~850 | 686 |
| R | 540~1188 | 150~330 | 12~50 | 400~750 | 686 | |||
| 250HS-ST | 560 | 12/10 | M | 936~1980 | 260~550 | seven~sixty eight | three hundred~800 | 762 |
| R | 720~1620 | two hundred~450 | seven~45 | three hundred~650 | 762 | |||
| 300HS-TU | 560 | 14/12 | M | 1260~2772 | 350~770 | 13~sixty three | 300~600 | 965 |
| R | 1152~2520 | 320~700 | 13~forty four | 300~five hundred | 965 | |||
| 350HS-TU | 1200 | sixteen/fourteen | M | 1368~3060 | 380~850 | 11~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | twenty/18 | M | 2520~5400 | 700~1500 | thirteen~57 | two hundred~400 | 1370 |
| 25HHS-C | thirty | 1.five/1 | M | 16.2~34.two | 4.five~9.5 | 25~92 | 1400~2200 | 330 |
| 50HHS-D | sixty | three/2 | M | 68.four~136.8 | 19~38 | twenty five~87 | 850~1400 | 457 |
| 75HHS-E | 120 | 4/3 | M | 126~252 | 35~70 | 12~ninety seven | 600~1400 | 508 |
| 100HHS-E | a hundred and twenty | 6/4 | M | 324~720 | ninety~two hundred | thirty~118 | 600~1000 | 711 |
| 150HHS-S | 560 | 8/six | M | 468-1008 | a hundred thirty~280 | 20~94 | five hundred~a thousand | 711 |
For the material of putting on components,
“M” = metallic, extremely chromium alloy “R” = anti-abrasive rubber
Contact
Welcome to contact us any time for information.
Your inquiry will get our prompt interest and reaction !
