Centrifugal Horizontal Slurry Pums Introduction:
1. HS series slurry pump is created for the ongoing pumping of high abrasive, large density slurries with nominal routine maintenance demands. The donning areas are created of extremely chrome alloy or rubber. It will sustain high effectiveness over the wear life of its components.
two. The metallic soaked areas and rubber types can be interchangeable for dealing with diverse liquids or slurries.
3. HS slurry pumps are obtainable in dimensions ranging from 1 inch to 18 inch discharge and attribute high effectiveness performance capable of stream charges from 10.8 to 5400 m³/h and heads up to a hundred twenty five meters for higher head types.
four. Polyurethane Elements can be interchangeable with rubber kinds.
Attributes:
one. Cylindrical framework of bearing assembly: handy to change the space amongst impeller and entrance liner
and can beremoved completely
two. Interchangeable anti-abrasive moist elements manufactured of high-chrome alloys
3. Casing halves of ductile iron with exterior reinforcing ribs supply large working force capabilities
and an further evaluate of security.
4. The discharge branch can be oriented to any 8 positions at the interval of forty five levels
5. Different push sorts: DC(direct link), V-belt push, equipment box reducer, hydraulic couplings, VFD,
SCR management, and so on
six. The shaft seal makes use of the packing seal, expeller seal and mechanical seal
Standard Software:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Squander sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • CZPT |
| • Alumina Business | • Power Plant | • Potash Fertilizer Plant | • Other industries |
| • Iron ore sand | • Copper Focus | • Gold mine | •Molybdenum |
| Model | Max Electricity (Kw) |
Inlet & Outlet dimensions (inch) | Substance for Put on Areas | Flow Charge (Q) | Head (H) meter |
Velocity (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | fifteen | one.five/1 | M | 12.six~28.8 | 3.5~eight | 6~68 | 1200~3800 | 152 |
| R | ten.8~25.2 | 3~7 | 7~fifty two | 1400~3400 | 152 | |||
| 40HS-B | 15 | two/one.five | M | 32.four~72 | nine~twenty | 6~58 | 1200~3200 | 184 |
| R | 25.two~fifty four | 7~fifteen | 5.5~forty one | one thousand~2600 | 178 | |||
| 50HS-C | 30 | 3/2 | M | 39.6~86.four | 11~24 | 12~64 | 1300~2700 | 214 |
| R | 36~75.6 | 10~21 | thirteen~46 | 1300~2300 | 213 | |||
| 75HS-C | thirty | 4/three | M | 86.four~198 | 24~fifty five | 9~52 | one thousand~2200 | 245 |
| R | seventy nine.2~a hundred and eighty | 22~fifty | 5~34.5 | 800~1800 | 245 | |||
| 100HS-D | 60 | 6/4 | M | 162~360 | 40~100 | 12~56 | 800~1550 | 365 |
| R | 144~324 | forty~90 | 12~45 | 800~1350 | 365 | |||
| 150HS-E | a hundred and twenty | 8/six | M | 360~828 | one hundred~230 | ten~sixty one | five hundred~1140 | 510 |
| R | 324~720 | ninety~200 | 7~49 | 400~1000 | 510 | |||
| 200MS-E | 120 | ten/eight | M | 666~1440 | 185~400 | fourteen~sixty | 600~1100 | 549 |
| 200HS-ST | 560 | 10/eight | M | 612~1368 | 170~380 | eleven~61 | four hundred~850 | 686 |
| R | 540~1188 | 150~330 | 12~fifty | four hundred~750 | 686 | |||
| 250HS-ST | 560 | twelve/ten | M | 936~1980 | 260~550 | 7~sixty eight | 300~800 | 762 |
| R | 720~1620 | 200~450 | seven~forty five | 300~650 | 762 | |||
| 300HS-TU | 560 | fourteen/twelve | M | 1260~2772 | 350~770 | 13~sixty three | three hundred~600 | 965 |
| R | 1152~2520 | 320~seven-hundred | thirteen~44 | three hundred~500 | 965 | |||
| 350HS-TU | 1200 | 16/14 | M | 1368~3060 | 380~850 | 11~63 | 250~550 | 1067 |
| 450HS-TU | 1200 | twenty/eighteen | M | 2520~5400 | 700~1500 | thirteen~57 | two hundred~400 | 1370 |
| 25HHS-C | 30 | 1.five/one | M | sixteen.2~34.two | 4.5~nine.5 | twenty five~92 | 1400~2200 | 330 |
| 50HHS-D | 60 | three/two | M | 68.four~136.8 | 19~38 | 25~87 | 850~1400 | 457 |
| 75HHS-E | a hundred and twenty | four/3 | M | 126~252 | 35~70 | twelve~ninety seven | 600~1400 | 508 |
| 100HHS-E | a hundred and twenty | six/four | M | 324~720 | ninety~two hundred | thirty~118 | 600~a thousand | 711 |
| 150HHS-S | 560 | 8/six | M | 468-1008 | a hundred thirty~280 | 20~94 | 500~1000 | 711 |
For the substance of donning components,
“M” = metallic, ultra chromium alloy “R” = anti-abrasive rubber
Welcome to speak to us 7×24 for far more information.
Any of your inquiry or suggestions will get our prompt interest and reaction !
