Hydraulic CNC Press Bending Machine Euro-PRO B 63t 4000mm

Hydraulic CNC Press Bending Machine Euro-PRO B 63t 4000mm

Solution Description
one. CZPT method:
– Undertake integrated hydraulic management system, a lot more reliable
– Consist of motor, oil pump and valve groups
– Be installed at the top of the oil box, which can guarantee that the cylinder is usually full of oil when the slide is shifting down at higher velocity
– Complete doing work cycle can be recognized through the management of hydraulic valve.
– The functioning strain at the correct facet of the wall board can be altered by the remote adjustment valve
2. Protective fence and the protection interlock:
– Protecting fence and the protection interlocker to make certain the procedure safety. Power provide change that is set in the electric box will be routinely turned off when the box’s door is opened or the fence is turned up. Protecting barrier with protection interlocker is mounted on the back again of the machine. Another, there are travel restrict security and foot pedestal mounted crisis off swap.

3. Synchro manage program:
– Slide syncho system: Adopt steel torsion bar synchro system, straightforward in composition and substantial in precision
– two ends of slide has 2 synchro fork which make, The technique utilizes higher die payment to increase the brake precision.
– Undertake upper die compensation to boost the brake precision
4. Sectional RAM Clamp Bars:
-Independent sectional clamping bars are supplied as standard gear in buy to securely fasten quick dies, as properly as normal size tooling. Unique crown correcting unit is normal.
5. Advance technologies and methods:
– This metallic machining resource is a kind of metal torsion bar synchro push brake. -Electronic control of back again gauges and RAM stroke, information exhibited and handbook placing
– Process of cylinder and sealing element:
Cylinder: No. 45# steel handled, internal holes wonderful machined and extruded.
Valve rods: No. forty five# metal dealt with, nickel and phosphorous coated outside.
 

Design
(WC67Y)
Nominal Stress (kN) Size of desk (mm) Distance Among Housing (mm) Throat Depth (mm) Stroke (mm) Open Hight (mm) Primary Motor (kW) Dimensions
(L x W x H) (mm)
bodyweight (T)
40/2000 four hundred 2000 1600 200 one hundred ten 335 four 2545x1510x2050 3
forty/2500 four hundred 2500 2000 200 one hundred ten 335 4 2950x1510x2080 3.five
63/2000 630 2000 1600 250 110 350 5.5 2555x1600x2130 3.8
sixty three/2500 630 2500 2000 250 a hundred and ten 350 five.five 2960x1600x2180 4.two
63/3200 630 3200 2600 250 one hundred ten 350 five.five 3740x1600x2230 five.two
one hundred/2500 one thousand 2500 2000 350 one hundred fifty four hundred 7.5 2980x1650x2330 six.3
one hundred/3200 one thousand 3200 2600 350 one hundred fifty four hundred seven.5 3740x1650x2355 seven
a hundred/4000 1000 4000 3200 350 150 400 seven.5 4550x1650x2450 eight.8
100/5000 1000 5000 4000 350 150 four hundred 7.5 5100x1500x2650 11.eight
one hundred twenty five/2500 1250 2500 2000 350 a hundred and fifty 410 7.5 3980x1650x2370 7.5
a hundred twenty five/3200 1250 3200 2600 350 150 410 seven.five 3750x1650x2450 8.two
one hundred twenty five/4000 1250 4000 3200 350 a hundred and fifty 410 7.five 4550x1650x2470 nine
125/5000 1250 5000 4000 350 one hundred fifty 410 7.5 5100x1500x2795 eleven.5
125/6000 1250 6000 4500 350 150 410 seven.5 6100x1500x2895 14
160/2500 1600 2500 2000 350 a hundred and fifty 425 11 2980x1715x2410 8.five
160/3200 1600 3200 2550 350 one hundred fifty 425 eleven 3750x1715x2450 11
one hundred sixty/4000 1600 4000 3200 350 a hundred ninety 450 eleven 4550x1715x2730 twelve
one hundred sixty/5000 1600 5000 4000 350 a hundred ninety 450 11 5100x1570x2900 15.five
one hundred sixty/6000 1600 6000 4500 350 a hundred ninety 450 11 6100x1570x3571 19
200/3200 2000 3200 2600 350 240 460 eleven 3750x1815x2715 13
two hundred/4000 2000 4000 3200 350 240 460 11 4550x1815x2850 fourteen
200/5000 2000 5000 3800 350 240 460 eleven 5100x1715x3571 18.5
200/6000 2000 6000 4500 350 240 460 eleven 6100x1715x3120 21
250/3200 2500 3200 2600 four hundred 240 525 eleven 3750x2571x2850 15.5
250/4000 2500 4000 3200 400 240 525 eleven 4550x2571x3571 17
250/5000 2500 5000 3800 400 240 525 11 5100x1890x3190 21.5
250/6000 2500 6000 4500 four hundred 240 525 eleven 6100x1890x3350 28
three hundred/3200 3000 3200 2600 400 250 545 15 3740x2100x3235 19.5
300/4000 3000 4000 3200 four hundred 250 545 15 4340x2100x3300 22
three hundred/5000 3000 5000 3800 four hundred 250 545 fifteen 5100x2100x3430 26
300/6000 3000 6000 4500 four hundred 250 545 fifteen 6100x2100x3490 29

 

Hydraulic CNC Press Bending Machine Euro-PRO B 63t 4000mm