Introduction:
one. HS series slurry pump is developed for the constant pumping of higher abrasive, higher density slurries with minimum servicing requirements. The sporting parts are manufactured of extremely chrome or and rubber. It will sustain large performance over the wear life of its parts.
2. The steel wet areas and rubber types can be interchangeable for handling various liquids or slurries.
3. HS slurry pumps are offered in dimensions ranging from one inch to eighteen inch discharge and attribute high performance overall performance capable of flow rates from ten.eight to 5400 m³/h and heads up to a hundred twenty five meters for higher head versions.
Functions:
1. Cylindrical composition of bearing assembly: practical to alter the space in between impeller and entrance liner
and can beremoved entirely
2. Interchangeable anti-abrasive moist elements created of high-chrome alloys
3. Casing halves of ductile iron with external reinforcing ribs supply substantial functioning strain capabilities
and an further evaluate of safety.
four. The discharge branch can be oriented to any eight positions at the interval of forty five levels
five. A variety of generate kinds: DC(direct connection), V-belt generate, gear box reducer, hydraulic couplings, VFD,
SCR handle, and so on
6. The shaft seal makes use of the packing seal, expeller seal and mechanical seal
Common Application:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Squander sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • CZPT |
| • Alumina Business | • Electricity Plant | • Potash Fertilizer Plant | • Other industries |
| • Iron ore sand | • Copper Focus | • Gold mine | •Molybdenum |
| Product | Max Power (Kw) |
Inlet & Outlet measurement (inch) | Material for Wear Components | Stream Rate (Q) | Head (H) meter |
Speed (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | 15 | one.5/1 | M | 12.six~28.8 | 3.5~eight | 6~68 | 1200~3800 | 152 |
| R | 10.8~twenty five.2 | three~seven | seven~52 | 1400~3400 | 152 | |||
| 40HS-B | 15 | 2/1.5 | M | 32.four~72 | 9~twenty | six~fifty eight | 1200~3200 | 184 |
| R | twenty five.two~fifty four | seven~fifteen | five.5~forty one | 1000~2600 | 178 | |||
| 50HS-C | 30 | three/2 | M | 39.six~86.4 | 11~24 | twelve~64 | 1300~2700 | 214 |
| R | 36~75.6 | ten~21 | thirteen~forty six | 1300~2300 | 213 | |||
| 75HS-C | 30 | 4/three | M | 86.four~198 | 24~55 | nine~52 | one thousand~2200 | 245 |
| R | seventy nine.two~180 | 22~fifty | five~34.5 | 800~1800 | 245 | |||
| 100HS-D | 60 | 6/4 | M | 162~360 | forty~100 | twelve~fifty six | 800~1550 | 365 |
| R | one hundred forty four~324 | 40~ninety | twelve~forty five | 800~1350 | 365 | |||
| 150HS-E | 120 | eight/six | M | 360~828 | 100~230 | 10~61 | 500~1140 | 510 |
| R | 324~720 | ninety~200 | seven~49 | 400~a thousand | 510 | |||
| 200MS-E | a hundred and twenty | ten/8 | M | 666~1440 | 185~four hundred | fourteen~60 | 600~1100 | 549 |
| 200HS-ST | 560 | ten/eight | M | 612~1368 | 170~380 | eleven~sixty one | four hundred~850 | 686 |
| R | 540~1188 | a hundred and fifty~330 | 12~fifty | 400~750 | 686 | |||
| 250HS-ST | 560 | 12/ten | M | 936~1980 | 260~550 | 7~sixty eight | 300~800 | 762 |
| R | 720~1620 | two hundred~450 | seven~45 | 300~650 | 762 | |||
| 300HS-TU | 560 | 14/twelve | M | 1260~2772 | 350~770 | thirteen~sixty three | 300~600 | 965 |
| R | 1152~2520 | 320~seven-hundred | 13~forty four | three hundred~five hundred | 965 | |||
| 350HS-TU | 1200 | sixteen/14 | M | 1368~3060 | 380~850 | eleven~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | twenty/eighteen | M | 2520~5400 | seven hundred~1500 | thirteen~fifty seven | two hundred~four hundred | 1370 |
| 25HHS-C | thirty | 1.five/1 | M | sixteen.2~34.two | 4.five~nine.5 | twenty five~ninety two | 1400~2200 | 330 |
| 50HHS-D | 60 | three/two | M | sixty eight.4~136.8 | 19~38 | 25~87 | 850~1400 | 457 |
| 75HHS-E | one hundred twenty | four/three | M | 126~252 | 35~70 | twelve~97 | 600~1400 | 508 |
| 100HHS-E | one hundred twenty | 6/four | M | 324~720 | ninety~200 | thirty~118 | 600~one thousand | 711 |
| 150HHS-S | 560 | eight/six | M | 468-1008 | one hundred thirty~280 | twenty~94 | 500~one thousand | 711 |
For the substance of donning components,
“M” = metallic, ultra chromium alloy “R” = anti-abrasive rubber
Get in touch with
Welcome to make contact with us any time for information.
Your inquiry will get our prompt attention and response !
