Solution description:

Design DX68 CNC hose crimping device has geared up with pc numerical manage method, quick crimp and great high quality. This equipment features substantial crimp precision, massive force, low sounds and simple to run. It can make the mould foundation division to be far more even by way of the double inclined aircraft 8-flap mould seat outfitted with a higher precision guiding unit. DX68 CNC hose crimping equipment is mainly used for crimping processing for substantial force hydraulic hose assembly in the mechanical engineering. It can also be used for crimping metal pipes, especially large pipes and irregular condition pipes.This machine attributes modest and moveable visual appeal, massive power, reduced noise and effortless to work. The buckling quantity can be precise adjusted via a scale. It makes the mould base division to be more even through the double inclined aircraft 8-flap mould seat outfitted with a substantial accuracy guiding system.

Set up and Procedure
one. Include adequately 70 liters of CZPT Wall brand forty six# anti-abrasion hydraulic oil. If the room temperature is reduced than 10ºC, ten% transformer oil is require to include.
Join the electrical resource properly as for every the machine requirements, to make the path of the motor rotation to be regular with the rotation route marking, and grounding protection shall be accomplished.
2. Regulating the scale
The scale is used for regulating the volume of the buckling. When it is regulated clockwise, the buckling volume will reduce, when it is regulated anticlockwise, the buckling amount will increase. The scale is connected together with oil cylinder stop protect via a few socket head screws and three springs on the scale base. When utilizing a hand to pull the scale (vertical to the oil cylinder conclude protect route), the scale can flexibly leave from the oil cylinder finish cover. When releasing the scale, the scale will be recovered relying on spring pressure. Prior to the device is turned on, examine carefully if the scale telescoping is versatile and if the direct relationship is dependable.
3. The primary scale is turned within line of the secondary scale, switch the equipment on for test run, and notice if all actions are standard. If when the piston conducts reciprocating movement, there is a crawling phenomenon, the bleed screw on the oil cylinder best shall be unscrewed for exhausting air.
4. Stress regulation
The buckling strain and opening mould pressure will be controlled by means of two knobs at the back again of the oil cylinder (see figure), when it is regulated clockwise, the pressure will boost, when it is controlled anticlockwise, the strain will lower (The pressure has previously been well controlled when ex-manufacturing unit).
five. Operation 
Based on the dimension of the rubber hose to be buckled, choose ideal mould as for each the specialized parameter reference table of the locking pipe and mount it on the mould foundation. Regulated well the scale position as for every the data in the knowledge in the table, the pipe locking can be carried out. Soon after pipe locking, use a vernier caliper to mease the outdoors diameter dimension of the pipe sleeve right after buckling to see if it fulfills the reference desk knowledge of the parameter. If it does not satisfy the information, the scale shall be exactly regulated until finally it satisfies the specifications. Because the manufactures of the pipe sleeve are different, so, particular dimension, material, hardness and so on are definitely not the same. These aspects would consequence distinct influences on the pipe locking end result, for that reason, the knowledge in the table is only for reference, the detailed information take the strain take a look at as the basis.

 Notices

1. When buckling, make the joint to identify the mould middle as significantly as achievable, the joint is not buckled on the hex nut.
2. Avert resource and other overseas subject from entering the locking head.
3. After the function is concluded for every single time, the eight-block mould foundation should be manufactured to extend to the finest extent, this can make the spring to be at extension status. If not, the spring will be damage.
4. When operating, the hand ought to not stretch into the locking head.
5. The power source have to be switched off when upkeep is accomplished.

Servicing

1. We will provide a assure to hold the machine in excellent repair in three a long time from the day when the device is purchased. All fitting troubles will be free of cost fixed (or replaced if required) in the course of the ensure period of time. The damage resulted from inappropriate use o incident hurt does not belong to cost-free of charge repair variety.
2. The hydraulic oil in the oil tank ought to be usually checked, if oil amount is identified to be insufficient, the oil shall be timely supplemented. If the oil liquid is polluted, it shall be filtered or changed.
   The locking head shall hold inside cleanliness. Steer clear of the international issues throughout processing to enter into the locking head oil cylinder via the mould to influence the typical use. Wipe out the international matters, which are brought by the mould human body in time when buckling the joint.
   Frequently fill suitable grease into the mould physique for lubrication.

Promise
We will supply a promise to preserve the machine in very good restore inside three several years from the working day when the device is purchased. All fitting difficulties will be free of charge of charge repaired (or changed if necessary) in the course of the guarantee period. The harm resulted from incorrect use o incident hurt does not belong to totally free of cost repair range.

Troubleshooting

Difficulty phenomena	Difficulties reason	Eliminating technique
Equipment has not motion	Oil tank has not been loaded with oil	Fill oil as for each prerequisite
	Motor rotation course is not right	Regulate two section traces
	CZPT trouble	Overhaul electric powered circuits
Scale is ruined	The scale is fastened on the oil cylinder finish encounter by the screw	Control the scale as for every the instruction to make scale to telescope freely
	Conductor at scale place is related with scale	Anew join the scale conductor to make it to be insulated from scale foundation
	CZPT difficulties	Overhaul electrical circuits and electric factors
	Scale conductor slicing	Anew hook up scale
	Program pressure is excessively low	Change buckling stress-regulating valve
No buckling	The valve core of solenoid reversal valve is seizured by foreign matters	Dismount solenoid reversal valve, use gasoline to clean the valve core.
	CZPT difficulties	Overhaul electrical circuits
Mould is not opened	Opening mould strain is excessively minimal	Modify opening mould stress regulating valve
	CZPT difficulty	Overhaul electric powered circuits
Big sound	Installation is not stable	Carry out horizontal steady set up
	CZPT oil is excessively dirty	CZPT or alter it
	CZPT is blocked	Use gasoline to clear the filter
Mould base crawls	Gas in the hydraulic oil has not bee exhausted totally	Suited unscrew the bleed screw, make the piston in the oil cylinder to go again to final place to exhaust gasoline, then screw down bleed screw.
	Lubrication is bad	Smear grease on the doing work inclined face of mould foundation
Oil leakage	Joint is not tightened intently	Tighten the oil pipe joint
	Sealing washer is broken.	Substitute sealing washer.

Our service:

Pre-Product sales Service

* Inquiry and consulting assist.
* Sample testing assistance.
* Check out our Factory & Office.
 

Following-Revenue Provider

* Guarantee for 3 many years.
* Education how to instal and use the device.
* Supply totally free swift-use component.
 
Payment Term:

CZPT Assurance

* Spend to our firm’s USD lender transfer BY T/T.
* 100% merchandise top quality protection 100% on-time cargo protection 100% payment security.

T/T

* 100% T/T in progress(regular versions in inventory).
* 50% T/T in advance, balance paid ahead of shipping(for the CZPT versions).

Our manufacturing unit also have accept the payment by western union,paypal and income gram.

FAQ:
1.Issue:Are you company or buying and selling organization?
Reply:We are company given that 1997.

two.Issue:Certificates ?
Reply:CE,ISO

three.Issue:Supply time?
Solution:The devices arein stock now,can be shipped as you need to have.

four.Issue:What is theMOQ?
Solution:one established for you test.

five.Question:Can I get some price cut ?
Indeed, buddy.The more you get, the much more you preserve.

six.Question:What is the payment?
Solution:T/T in advance,as most of our crimping equipment model are in inventory.
L/C,western union,paypal and cash gram also can be acknowledged.

seven.Issue:Can you make CZPT patterns or Symbol?
Of system, we are professional OEM maker.

8.Query:Can I visit your manufacturing facility?
Sure,you are warmly welcome to go to our manufacturing unit anytime. Prior to the browsing, you should speak to us first of all and affirm the going to time, our vehicle can decide up you to our factory.
 

Why decide on CZPT Manufacturing unit?

1.High Quality CE UL ISO approved DX68 hose crimping equipment.

2.CZPT Inexpensive handbook hose crimping equipment,Very best Quality you at any time have.

three.Samway create the hose crimping device up to 800mm diameter hose with 2500 ton pressing drive.

4.Fast supply, our factory can dispatch the machine inside 24 hours after receive the payment and promise to ship nomally 7 operating days on board.

Discounts available with bulk acquire

Braided hose crimper DX68 Up to 2” 6SP R15 CZPT Hose Compact in Size Cost-effective CZPT Machine

220V 240V one phase  50/60hz, 380V/400v/415v/440v three phase equipment have inventory.

A fantastic economical braided hose crimper will crimp up to 2″ 4SP/4SH hydraulic hose,the equipment is equiped with newest technological innovation,Motor from SIEMENS company control system from SIEMENS,CZPT hydraulic valves,NOK seal make the machine druable.

Finn electrical power sequence braided hose crimper are mostly for services and small production goal,inexpensive and compact in layout,best for most of your wants in hose assembly.

Primary clientele:RYCO,PIRTEK,PARKER United states of america,CATERPILAR etc.

OEM services:Our factory hydraulic hose crimping machine for sale up to thirty”,crimping range up to 1000mm available,5000 ton crimping power.

Guarantee:Our factory hose crimping equipment offer three several years guarantee from date of purchasing.