Introduction:
1. HS series slurry pump is designed for the steady pumping of high abrasive, high density slurries with minimum routine maintenance specifications. The sporting parts are produced of ultra chrome or and rubber. It will preserve substantial efficiency in excess of the dress in lifestyle of its factors.
2. The metallic moist components and rubber kinds can be interchangeable for managing various liquids or slurries.
three. HS slurry pumps are offered in sizes ranging from 1 inch to eighteen inch discharge and attribute higher effectiveness performance capable of stream prices from ten.eight to 5400 m³/h and heads up to a hundred twenty five meters for substantial head versions.
Characteristics:
1. Cylindrical framework of bearing assembly: practical to change the place in between impeller and entrance liner
and can beremoved entirely
two. Interchangeable anti-abrasive moist elements made of higher-chrome alloys
3. Casing halves of ductile iron with exterior reinforcing ribs provide higher functioning strain capabilities
and an further measure of basic safety.
four. The discharge department can be oriented to any 8 positions at the interval of forty five degrees
five. Various generate kinds: DC(direct connection), V-belt travel, equipment box reducer, hydraulic couplings, VFD,
SCR management, and so forth
six. The shaft seal uses the packing seal, expeller seal and mechanical seal
Typical Software:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Waste sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • CZPT |
| • Alumina Market | • Electrical power Plant | • Potash Fertilizer Plant | • Other industries |
| • Iron ore sand | • Copper Concentration | • Gold mine | •Molybdenum |
| Design | Max Electrical power (Kw) |
Inlet & Outlet size (inch) | Substance for Dress in Elements | Circulation Rate (Q) | Head (H) meter |
Pace (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | fifteen | one.five/one | M | twelve.6~28.eight | 3.5~eight | six~sixty eight | 1200~3800 | 152 |
| R | ten.8~25.two | three~seven | seven~52 | 1400~3400 | 152 | |||
| 40HS-B | fifteen | two/1.five | M | 32.4~seventy two | 9~20 | 6~58 | 1200~3200 | 184 |
| R | twenty five.2~fifty four | seven~fifteen | 5.5~forty one | 1000~2600 | 178 | |||
| 50HS-C | 30 | three/2 | M | 39.6~86.4 | 11~24 | twelve~64 | 1300~2700 | 214 |
| R | 36~75.six | 10~21 | thirteen~46 | 1300~2300 | 213 | |||
| 75HS-C | 30 | 4/three | M | 86.four~198 | 24~fifty five | nine~52 | one thousand~2200 | 245 |
| R | 79.2~180 | 22~50 | five~34.five | 800~1800 | 245 | |||
| 100HS-D | 60 | six/4 | M | 162~360 | 40~100 | twelve~fifty six | 800~1550 | 365 |
| R | 144~324 | 40~90 | 12~45 | 800~1350 | 365 | |||
| 150HS-E | one hundred twenty | eight/6 | M | 360~828 | a hundred~230 | ten~61 | five hundred~1140 | 510 |
| R | 324~720 | 90~two hundred | 7~forty nine | four hundred~one thousand | 510 | |||
| 200MS-E | a hundred and twenty | 10/8 | M | 666~1440 | 185~four hundred | 14~60 | 600~1100 | 549 |
| 200HS-ST | 560 | 10/8 | M | 612~1368 | 170~380 | eleven~61 | 400~850 | 686 |
| R | 540~1188 | a hundred and fifty~330 | twelve~50 | 400~750 | 686 | |||
| 250HS-ST | 560 | twelve/ten | M | 936~1980 | 260~550 | seven~68 | three hundred~800 | 762 |
| R | 720~1620 | 200~450 | seven~45 | 300~650 | 762 | |||
| 300HS-TU | 560 | fourteen/12 | M | 1260~2772 | 350~770 | thirteen~63 | three hundred~600 | 965 |
| R | 1152~2520 | 320~seven hundred | thirteen~forty four | 300~five hundred | 965 | |||
| 350HS-TU | 1200 | sixteen/14 | M | 1368~3060 | 380~850 | 11~63 | 250~550 | 1067 |
| 450HS-TU | 1200 | twenty/eighteen | M | 2520~5400 | 700~1500 | 13~fifty seven | 200~400 | 1370 |
| 25HHS-C | 30 | one.5/1 | M | 16.two~34.2 | four.5~nine.5 | 25~92 | 1400~2200 | 330 |
| 50HHS-D | sixty | three/2 | M | sixty eight.four~136.8 | 19~38 | 25~87 | 850~1400 | 457 |
| 75HHS-E | one hundred twenty | four/3 | M | 126~252 | 35~70 | twelve~ninety seven | 600~1400 | 508 |
| 100HHS-E | 120 | 6/four | M | 324~720 | ninety~200 | 30~118 | 600~a thousand | 711 |
| 150HHS-S | 560 | eight/6 | M | 468-1008 | a hundred thirty~280 | 20~ninety four | 500~a thousand | 711 |
For the content of wearing parts,
“M” = steel, extremely chromium alloy “R” = anti-abrasive rubber
Speak to
Welcome to contact us any time for specifics.
Your inquiry will get our prompt attention and response !
