Introduction:
one. HS series slurry pump is created for the constant pumping of higher abrasive, higher density slurries with minimal servicing needs. The donning elements are created of ultra chrome or and rubber. It will preserve high performance in excess of the put on daily life of its elements.
two. The steel soaked areas and rubber kinds can be interchangeable for handling diverse liquids or slurries.
three. HS slurry pumps are accessible in measurements ranging from 1 inch to 18 inch discharge and feature high effectiveness performance able of circulation costs from 10.8 to 5400 m³/h and heads up to a hundred twenty five meters for high head types.
Attributes:
1. Cylindrical construction of bearing assembly: practical to adjust the place between impeller and front liner
and can beremoved entirely
2. Interchangeable anti-abrasive soaked parts manufactured of large-chrome alloys
three. Casing halves of ductile iron with exterior reinforcing ribs supply substantial operating stress abilities
and an extra measure of basic safety.
4. The discharge department can be oriented to any eight positions at the interval of forty five degrees
five. A variety of generate types: DC(immediate relationship), V-belt drive, equipment box reducer, hydraulic couplings, VFD,
SCR control, etc
six. The shaft seal uses the packing seal, expeller seal and mechanical seal
Normal Software:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Squander sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • CZPT |
| • Alumina Business | • Energy Plant | • Potash Fertilizer Plant | • Other industries |
| • Iron ore sand | • Copper Focus | • Gold mine | •Molybdenum |
| Model | Max Electricity (Kw) |
Inlet & Outlet size (inch) | Material for Wear Elements | Flow Fee (Q) | Head (H) meter |
Pace (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | 15 | 1.5/1 | M | twelve.six~28.eight | 3.5~eight | six~sixty eight | 1200~3800 | 152 |
| R | ten.eight~twenty five.two | three~seven | 7~fifty two | 1400~3400 | 152 | |||
| 40HS-B | fifteen | two/one.five | M | 32.four~seventy two | nine~20 | 6~58 | 1200~3200 | 184 |
| R | twenty five.2~fifty four | seven~fifteen | five.5~forty one | 1000~2600 | 178 | |||
| 50HS-C | 30 | 3/two | M | 39.six~86.four | 11~24 | twelve~64 | 1300~2700 | 214 |
| R | 36~75.6 | 10~21 | thirteen~forty six | 1300~2300 | 213 | |||
| 75HS-C | 30 | 4/three | M | 86.4~198 | 24~55 | nine~fifty two | one thousand~2200 | 245 |
| R | 79.2~a hundred and eighty | 22~50 | 5~34.5 | 800~1800 | 245 | |||
| 100HS-D | 60 | 6/four | M | 162~360 | 40~100 | 12~fifty six | 800~1550 | 365 |
| R | a hundred and forty four~324 | 40~90 | 12~forty five | 800~1350 | 365 | |||
| 150HS-E | one hundred twenty | eight/6 | M | 360~828 | 100~230 | 10~61 | five hundred~1140 | 510 |
| R | 324~720 | 90~200 | 7~49 | 400~1000 | 510 | |||
| 200MS-E | a hundred and twenty | ten/8 | M | 666~1440 | 185~400 | 14~sixty | 600~1100 | 549 |
| 200HS-ST | 560 | 10/8 | M | 612~1368 | 170~380 | eleven~61 | four hundred~850 | 686 |
| R | 540~1188 | a hundred and fifty~330 | twelve~50 | 400~750 | 686 | |||
| 250HS-ST | 560 | twelve/ten | M | 936~1980 | 260~550 | seven~sixty eight | 300~800 | 762 |
| R | 720~1620 | 200~450 | seven~45 | three hundred~650 | 762 | |||
| 300HS-TU | 560 | 14/twelve | M | 1260~2772 | 350~770 | thirteen~sixty three | three hundred~600 | 965 |
| R | 1152~2520 | 320~seven hundred | thirteen~44 | three hundred~five hundred | 965 | |||
| 350HS-TU | 1200 | 16/fourteen | M | 1368~3060 | 380~850 | 11~63 | 250~550 | 1067 |
| 450HS-TU | 1200 | twenty/18 | M | 2520~5400 | seven hundred~1500 | 13~fifty seven | two hundred~400 | 1370 |
| 25HHS-C | 30 | one.five/one | M | sixteen.2~34.two | 4.five~nine.5 | twenty five~92 | 1400~2200 | 330 |
| 50HHS-D | 60 | three/2 | M | 68.four~136.eight | 19~38 | twenty five~87 | 850~1400 | 457 |
| 75HHS-E | a hundred and twenty | 4/three | M | 126~252 | 35~70 | twelve~97 | 600~1400 | 508 |
| 100HHS-E | one hundred twenty | 6/four | M | 324~720 | ninety~200 | thirty~118 | 600~a thousand | 711 |
| 150HHS-S | 560 | 8/6 | M | 468-1008 | 130~280 | 20~ninety four | five hundred~1000 | 711 |
For the substance of donning elements,
“M” = metal, extremely chromium alloy “R” = anti-abrasive rubber
Make contact with
Welcome to get in touch with us any time for details.
Your inquiry will get our prompt focus and reaction !
