Introduction:
1. HS series slurry pump is developed for the constant pumping of substantial abrasive, substantial density slurries with small servicing needs. The wearing areas are created of extremely chrome or and rubber. It will sustain substantial performance above the use lifestyle of its factors.
2. The metallic soaked areas and rubber ones can be interchangeable for managing various liquids or slurries.
3. HS slurry pumps are offered in measurements ranging from one inch to 18 inch discharge and function high performance performance able of movement charges from 10.eight to 5400 m³/h and heads up to 125 meters for high head versions.
Functions:
one. Cylindrical composition of bearing assembly: practical to adjust the place among impeller and entrance liner
and can beremoved completely
2. Interchangeable anti-abrasive moist areas manufactured of large-chrome alloys
three. Casing halves of ductile iron with external reinforcing ribs supply higher functioning pressure abilities
and an further evaluate of basic safety.
four. The discharge department can be oriented to any 8 positions at the interval of 45 levels
5. Different push sorts: DC(immediate link), V-belt generate, equipment box reducer, hydraulic couplings, VFD,
SCR management, etc
six. The shaft seal makes use of the packing seal, expeller seal and mechanical seal
Typical Application:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Squander sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • CZPT |
| • Alumina Market | • Electricity Plant | • Potash Fertilizer Plant | • Other industries |
| • Iron ore sand | • Copper Concentration | • Gold mine | •Molybdenum |
| Product | Max Power (Kw) |
Inlet & Outlet dimensions (inch) | Substance for Put on Areas | Circulation Rate (Q) | Head (H) meter |
Speed (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | fifteen | one.five/1 | M | 12.6~28.eight | 3.5~eight | six~68 | 1200~3800 | 152 |
| R | 10.8~25.2 | 3~seven | seven~52 | 1400~3400 | 152 | |||
| 40HS-B | fifteen | two/one.five | M | 32.4~seventy two | 9~20 | 6~58 | 1200~3200 | 184 |
| R | twenty five.two~54 | 7~15 | 5.five~forty one | a thousand~2600 | 178 | |||
| 50HS-C | thirty | 3/2 | M | 39.6~86.four | 11~24 | twelve~sixty four | 1300~2700 | 214 |
| R | 36~seventy five.6 | ten~21 | thirteen~46 | 1300~2300 | 213 | |||
| 75HS-C | 30 | 4/three | M | 86.four~198 | 24~fifty five | 9~fifty two | one thousand~2200 | 245 |
| R | seventy nine.two~180 | 22~fifty | five~34.5 | 800~1800 | 245 | |||
| 100HS-D | sixty | 6/four | M | 162~360 | 40~100 | 12~fifty six | 800~1550 | 365 |
| R | one hundred forty four~324 | 40~90 | twelve~45 | 800~1350 | 365 | |||
| 150HS-E | a hundred and twenty | 8/6 | M | 360~828 | one hundred~230 | ten~sixty one | five hundred~1140 | 510 |
| R | 324~720 | 90~two hundred | seven~forty nine | four hundred~1000 | 510 | |||
| 200MS-E | one hundred twenty | 10/8 | M | 666~1440 | 185~four hundred | fourteen~60 | 600~1100 | 549 |
| 200HS-ST | 560 | 10/eight | M | 612~1368 | one hundred seventy~380 | 11~sixty one | 400~850 | 686 |
| R | 540~1188 | one hundred fifty~330 | 12~50 | 400~750 | 686 | |||
| 250HS-ST | 560 | twelve/10 | M | 936~1980 | 260~550 | seven~68 | three hundred~800 | 762 |
| R | 720~1620 | 200~450 | 7~45 | 300~650 | 762 | |||
| 300HS-TU | 560 | 14/twelve | M | 1260~2772 | 350~770 | thirteen~sixty three | 300~600 | 965 |
| R | 1152~2520 | 320~seven-hundred | thirteen~forty four | 300~five hundred | 965 | |||
| 350HS-TU | 1200 | 16/fourteen | M | 1368~3060 | 380~850 | 11~63 | 250~550 | 1067 |
| 450HS-TU | 1200 | twenty/18 | M | 2520~5400 | 700~1500 | 13~fifty seven | two hundred~four hundred | 1370 |
| 25HHS-C | thirty | 1.five/one | M | 16.2~34.two | 4.5~9.5 | 25~ninety two | 1400~2200 | 330 |
| 50HHS-D | sixty | 3/two | M | 68.4~136.eight | 19~38 | twenty five~87 | 850~1400 | 457 |
| 75HHS-E | one hundred twenty | 4/three | M | 126~252 | 35~70 | twelve~ninety seven | 600~1400 | 508 |
| 100HHS-E | a hundred and twenty | 6/4 | M | 324~720 | 90~two hundred | 30~118 | 600~one thousand | 711 |
| 150HHS-S | 560 | 8/six | M | 468-1008 | a hundred thirty~280 | twenty~ninety four | 500~a thousand | 711 |
For the content of wearing components,
“M” = metal, ultra chromium alloy “R” = anti-abrasive rubber
Speak to
Welcome to contact us any time for particulars.
Your inquiry will get our prompt attention and response !
