PTFE-Lined Anti-Corrosion Pneumatic Diaphragm Pump Corrosion-Resistant Diaphragm Pump

PTFE-Lined Anti-Corrosion Pneumatic Diaphragm Pump Corrosion-Resistant Diaphragm Pump

Lining PTFE anti-corrosion pneumatic diaphragm pump 1. No want to irrigate h2o, the suction stroke is up to two-7m, the raise is up to 50m, and the outlet strain is ≥6kgf/c m2.

two, massive particles, up to 10mm in diameter When pumping mud, impurities, the pump wears little.

three. The head and stream can be modified steplessly by means of the opening of the valve. (The air force is adjusted among 1-7kg/c m2).

4. The pump has no rotating areas. With out the shaft seal diaphragm, the pumped medium is fully separated from the shifting parts of the pump and the functioning medium, and the transported medium will not leak outward. Therefore, when pumping toxic, volatile or corrosive media, it will not result in environmental pollution and endanger individual safety.

5. It is not needed to use electricity, and it is safe and reliable to use in flammable and explosive locations.

6, can be submerged in the medium to perform.

Functions

1. No want to irrigate water, the suction stroke is up to two-7m, the lift is up to 50m, and the outlet force is ≥6kgf/c m2.

The stream is vast and the overall performance is very good. It enables the QBY pneumatic diaphragm pump to pump equally the flowing liquid and the non-flowable medium. It has self-priming pump, submersible pump, shield pump, mud pump and impurity pump. Several benefits.

two, large particles, up to 10mm in diameter When pumping mud, impurities, the pump wears small.

three. The head and flow can be adjusted steplessly via the opening of the valve. (The air force is adjusted amongst 1-7kg/c m2).

4. The pump has no rotating components. Without the shaft seal diaphragm, the pumped medium is entirely separated from the shifting components of the pump and the functioning medium, and the transported medium will not leak outward. Consequently, when pumping poisonous, volatile or corrosive media, it will not trigger environmental air pollution and endanger personal security.

five. It is not needed to use electrical energy, and it is secure and dependable to use in flammable and explosive places.

6, can be submerged in the medium to operate.

seven. Straightforward to use and reputable in operation. The pump can be opened and closed merely by opening and closing the gas valve. Even if there is no medium operating or sudden quit owing to surprising circumstances, the pump will not be damaged. When overloaded, the pump will be broken. It will instantly end and have self-defense performance. When the load returns to regular, it can immediately start working.

eight. Straightforward composition and considerably less putting on components. The pump has straightforward structure, convenient set up and servicing. The medium transported by the pump will not touch the valve parts, linkages and other shifting elements, unlike other types of pumps thanks to rotors, pistons and gears. The put on of the blades and the like leads to the performance to slowly lower.

9, can transportation a much more viscous liquid. (viscosity under ten,000 centipoise)

ten. The pump does not need to have to be lubricated with oil. Even if it is idling, it has no result on the pump. This is a significant characteristic of the pump.

one. Compressed air is the electricity.

2. It is a volumetric pump caused by the reciprocating deformation of the diaphragm. The operating basic principle is equivalent to that of the plunger pump. Due to the functioning basic principle of the diaphragm pump, the diaphragm pump has the following characteristics:

(1) The pump will not overheat: the compressed air is employed as the electricity, and it is a approach of growth and warmth absorption when exhausting. When the pneumatic pump works, the temperature is lowered, and no damaging gas is discharged.

(2) No spark is produced: the pneumatic diaphragm pump does not use electric electrical power for power, and prevents static sparks soon after grounding.

(three) It can pass by way of the liquid made up of particles: simply because it is volumetric and the inlet is a ball valve, it is not easy to be blocked.

(4) The shearing pressure on the materials is extremely minimal: how to suck in when operating, so the agitation of the substance is tiny, suitable for the transportation of unstable substances.

(5) The movement charge can be altered, and a throttle valve can be extra at the materials outlet to alter the circulation charge.

(six) It has the operate of self-priming.

(seven) It can be operate vacant with out threat.

(8) You can function diving.

(9) The fluids that can be transported are incredibly wide, from reduced viscosity to higher viscosity, and viscous from corrosive.

(10) There is no complicated manage technique, no cables, fuses, and so forth.

(eleven) Tiny size, gentle excess weight and simple to move.

(twelve) It is easy to preserve without lubrication, and it will not pollute the functioning atmosphere due to dripping.

(thirteen) The pump is always successful and will not be degraded by dress in.

(fourteen) a hundred% energy utilization, when the outlet is shut, the pump instantly stops, tools moves, wears, overloads, warmth

(fifteen) There is no dynamic seal, and upkeep is easy to keep away from leakage. There is no dead level when working.
 

                 
(m three /h) (m) (kgf/cm two) (m)   (kbf/cm 2) (m 3 /min)
        (mm)      
QBY-25 ~two.four ~50 five seven 2.five seven .6
QBY-forty ~eight ~fifty 5 seven 4.five 7 .6
QBY-fifty ~twelve ~50 five seven eight 7 .9
QBY-65 ~sixteen ~fifty 5 seven eight 7 .nine
QBY-80 ~24 ~fifty 5 7 10 seven 1.five
QBY-a hundred ~thirty ~50 five 7 ten 7 one.five

PTFE-Lined Anti-Corrosion Pneumatic Diaphragm Pump Corrosion-Resistant Diaphragm Pump